Aviation plug wiring method:
1. In general, there will be a semicircle cleat at the back of the conventional aviation plug to fix the lead, and there will be two small turnbuckles on it. You can use tools to remove the nuts and then separate the deck.
2. After taking off the air plug splint, find a fine nail as a tool to put into the jack and fix it. Rotate the air plug in the opposite direction on the side, it can be more natural to pull the air plug core and wire out of the front for repair or wiring.
Aviation plug connection:
1, plug and remove connection: plug and remove connection a lot of people have seen, in simple terms is the aviation plug and aviation socket whether to plug or pull out is linear movement, does not need any rotation operation, the advantages are obvious, can reduce a lot of space, especially conducive to use in small occasions.
2, thread connection: thread connection is one of the most common, because this connection is better fixed, can be used in a strong vibration environment, to provide a safe guarantee for the use of products,** * the disadvantage is that the connection of the process of insertion is not several other to fast! Certainly not very slow! It's relative!
3, cabinet connection: cabinet air plug connection is one of the more special this way, must want to good fixed position and method in advance, to avoid air plug, plug the device can do delicate, but also more easier maintenance upgrade, tip: machine cabinet air plug structure of floating or elastic contact design is normally used to ensure that the correct connection.
4, bayonet connection: this form of bayonet is better understood, as the name implies is the bayonet fit together with each other, this type of connection form of the aviation plug has the characteristics of rapid installation, greatly reducing the time of the aviation plug connection, than only the thread connection of a reliable and rapid connection to find out the form.
